Ask about RIFE RC2 Dual Monitor Stand – 10–30″
Need Help?
Get the right model recommendation.
Send your quantity, use case and accessories needed. Rife will suggest the correct configuration.
Dual Monitor Stand
The RIFE RC2 Dual Monitor Stand – 10–30″ is a professional monitor-support solution designed for organisations and professionals who need a stable, adjustable and space-efficient display setup. Its primary search and buying intent is dual monitor stand. The model is presented separately from other RIFE mounts because its configuration—10–30 inch—addresses a specific workstation requirement rather than a generic monitor-holding need.
This model supports a dual-display arrangement. It is intended to help place screens at practical viewing heights, recover usable desk space and organise cables around the work area. Before ordering, match the monitor size, total weight, VESA pattern, desk thickness and required screen arrangement with the confirmed specification of the selected variant.
Why this model is different
The RIFE RC2 is positioned for buyers who already know the number of displays and the preferred mounting style. Instead of using one broad “monitor stand” description for every model, this page explains the specific arrangement, installation method and screen class associated with this product. That makes comparison easier for procurement teams and reduces the risk of selecting a mount that is unsuitable for the desk or displays.
Key features
- UNIVERSAL COMPATIBILITY: Dual monitor stand can fit monitors with hole patterns (VESA) 75*75mm and 100*100mm and screen sizes up to 27" and weighing up to 17.6 lbs.
- FULL ARTICULATION: The adjustable arm offers -90°/+35° tilt, 180° swivel, 360° rotation, and height adjustment along the center pole.
- SAVE VALUABLE WORKSPACE: Solid Clamp base holds 2 monitors, helping you save space and reduce clutter.
- CABLE MANAGEMENT: Cable clips keep cables organized and protected. Just enjoy your working, gaming, or viewing hours in a more comfortable environment.
Technical specifications
| Model | RC2 |
|---|---|
| Product type | Dual Monitor Stand |
| Compatible with VESA | 75 X 75 mm, 100 X 100 mm |
| Fits Screen Size | 10 inch-30 inch |
| Loading Weight Capacity | 22 lbs (10kgs) /per monitor |
| Tilt Angle | -85 degree~15 degree |
| Height Adjust | 7.9-14.2 inches (200-360mm) |
| Maximum Extension of Each Arm | 15 inches (381 mm) |
| Color | Black |
Specifications are based on the supplied product listing. Confirm the final configuration, included hardware and compatibility before placing an order.
Display positioning and ergonomic use
Product SKU:- RC2 This computer monitor desk mount is height adjustable and can swivel and tilt to help position your monitor at the ideal position. Simple, yet elegant, this clamp-type mount will provide an ergonomic monitor installation. This adjustable mount is perfect for anyone who wants to easily adjust their viewing height to an ergonomic level to help reduce neck, back, and eye strain while opening up valuable desktop space. Features:- UNIVERSAL COMPATIBILITY: Dual monitor stand can fit monitors with hole patterns (VESA) 75*75mm and 100*100mm and screen sizes up to 27" and weighing up to 17.6 lbs.
A monitor arm or stand should allow the primary viewing area to be positioned without forcing the user to lean forward or repeatedly turn the neck. Multi-monitor users should align the screens according to the frequency of use: the main display should remain central, while secondary displays can be angled inward. The mount does not by itself guarantee an ergonomic workstation; chair height, desk height, viewing distance and lighting must also be considered.
Recommended applications
- Corporate offices
- Home offices
- Software development
- Financial analysis
- Design and engineering desks
This product can also be considered for project-based installations where several workstations require a consistent screen arrangement. For bulk requirements, RIFE can review monitor models, desk construction and layout drawings before recommending the appropriate base, arm or pole configuration.
Compatibility checks before ordering
- Monitor size: check both diagonal size and physical width, especially for curved and ultrawide displays.
- Monitor weight: compare the weight without the original stand against the stated load per arm.
- VESA pattern: confirm the rear mounting-hole spacing and whether an adapter is required.
- Desk construction: verify thickness, edge clearance and strength for clamp or grommet installation.
- Screen arrangement: confirm horizontal, vertical, stacked or mixed portrait/landscape use.
- Cable length: allow sufficient cable movement through the full adjustment range.
Installation and adjustment guidance
Install the mount on a sound, level surface and use the supplied hardware intended for the selected mounting method. Support the monitor while attaching the VESA plate. Tighten fasteners evenly, but do not overtighten into the monitor chassis. After installation, route power and signal cables with enough slack for tilt, swivel and height movement. Gas-spring models should be tension-adjusted only after the monitor is attached.
For large, heavy or multi-screen configurations, two-person installation is recommended. Recheck fasteners after initial use and whenever monitors are changed. Where the desk construction or monitor compatibility is uncertain, obtain technical confirmation before installation.
Related RIFE monitor solutions
- RIFE 2MSCTV-T Dual Ultrawide Monitor Arm – Clamp, Vertical
- RIFE PMS-PRM57-D Dual Ultrawide Monitor Arm – Clamp, Gas Spring
- RIFE 2MSFVB-T Heavy-duty Dual Monitor Arm – Freestanding, Vertical
Request a project quotation
Share the monitor brand and model, quantity of screens, weight per screen, VESA pattern, desk thickness, preferred arrangement and required quantity. RIFE will confirm compatibility and prepare a quotation for the suitable monitor-mount configuration. For institutional or multi-workstation projects, layout and installation requirements can also be reviewed.
Frequently asked questions
Which monitor sizes suit the RC2?
The original listing indicates 10–30 inch compatibility. Confirm the exact width, curvature, weight and rear VESA position of each monitor before ordering.
How do I check VESA compatibility?
Measure the horizontal and vertical spacing between the four threaded mounting holes on the rear of the monitor. Common patterns include 75 × 75 mm and 100 × 100 mm, but the product specification must be checked.
Can the screens be used in portrait and landscape orientation?
Where rotation is included in the stated movement range, the display can be repositioned after checking cable clearance and monitor dimensions.
What information is required for a quotation?
Provide the number of monitors, screen size, weight per screen, VESA pattern, desk thickness, preferred mounting method, delivery city and quantity required.